I recently purchased a Kia Niro from Salvage. It was a runner and only had damage up to the radiators. I have managed to replace and fit all the damaged parts. However the car is still not starting at first i thought it may be a dead 12v batt but i have had a auto electrician test it and it is fine. Once he checked the system he found the following faults and believes these are the issue. The clutch actuator had no damage but the sensor was disconnected and i did reconnect it. i have researched how to bleed the accuator but the manual and videos only show the process with the engine running. Might be a long shot but looking at any information to help thanks in advance
1 post • Page 1 of 1
- You may also be interested in...
- Last post